Privacy notice

(personal data collected from the data subject)


We wish to inform you, pursuant to articles 13 and 14 of the 2016/679 European Regulation, also known as "General Data Protection Regulation" (hereafter "GDPR") concerning the protection of individuals with regard to the processing of personal data, as well as free circulation of such data, that the information and data supplied by you or otherwise acquired within the scope of the services provided by KONG spa will beprocessed in compliance with the above mentioned provisions and the confidentiality obligations that govern the activities of our organization

By the processing of personal data, we mean any operation or set of operations, including carried out without the aid of electronic tools, concerning the collection, recording, organization, storage, consultation, processing, modification, selection, extraction, comparison, use, interconnection, blocking, communication, dissemination, deletion and destruction of data, even if not recorded in a database.


The purpose of this notice is to make known with complete transparency the purposes for which we might use your data, how we will manage it, whom it could be communicated to, where it could be transferred to (inside or outside the EU) and what your rights are.


Who processes your data

Your data will be processed by KONG spa as Data Controller.

In addition to KONG spa wehereby inform you that external managers are present at the processing of personal data which has been appropriately mapped, registered, contracted and nominated by KONG spa pursuant to the provisions of art. 28 of the GDPR. The list of external managers involved in the processing of personal data is available at the head office of KONG spa.

Because we need your data

KONG spa will use your data exclusively for the following purposes:

- Purposes related to the management of the contractual relationship and the provision of the Services: your Data will be processed for the following purposes: creation, management and termination of the contractual and commercial relationship including the provision of training courses to your employees; fulfilment of accounting and tax obligations; fulfilment of legal obligations; audits of a fiscal and accounting nature; management of disputes; provision, support, updating and information on the Services offered;

 - Purposes related to marketing activities and newsletters. With your specific consent, your data will be processed for the following purposes: sending newsletters, information on new products and / or training courses, sending advertising material, invitation to events and updates on company initiatives.

- Purposes related to recording and processing of images: with your express consent, the data you provide (for example: images taken as film and / or photographs, interviews during events organized by KONG spa in which you take part) will be used for promotion and enhancement of the corporate brand reputation of KONG spa. 

KONG spa will carry out the processing

- Based on your Consent
- because it is required for the contractual obligations referred to in point 1
- because it is required to meet the legal obligations to which you are subject (e.g. accounting, salary, social security obligations);
- because processing is required in order to pursue a legitimate interest.

It follows that the provision of personal data is strictly necessary for the purposes referred to in point 1.

Any failure to provide the data will make it impossible to achieve the purposes previously stated and thus to pursue the contractual relationship.

 Purposes 2 and 3 do not derive from a legal obligation and the granting of the relevant consent is optional.

The entity concerned and the adequacy of the data provided will be assessed from time to time, in order to arrive at the resulting decisions and to prevent the processing of data in excess of the purposes pursued.

KONG spa undertakes not to use your personal data for any purpose other than those described in this notice, unless you are informed in advance and, where necessary, your consent has been obtained.

How we will use your data

KONG spa has as its objective the protection of its customers’ data,and thus to make sure that data processing is carried out in accordance with the principles of correctness, lawfulness and transparency. We therefore inform you that your Personal data will be processed, through the use of tools and procedures designed to ensure maximum security and confidentiality, using archival and hard copy, with the aid of digital media and information technology systems.

We would like to remind you that you may exercise a right of objection which, unless otherwise stated by you, can be notified by either traditional or automated communication methods.


The length of time for we will store your data:

Your personal data will be stored for a period not exceeding the period necessary for achievement of the purposes for which it was collected and subsequently processed. Personal data will be stored for the entire duration of the contract you have concluded, as well as for a subsequent period, in accordance with the following criteria:

- within the final dates stipulated by the current legislation;
- within the final date stipulated by secondary legislation that requires the storage of data (for example, tax declarations);
- within the period necessary to protect the rights of the data controller in the event of any disputes related to provision of the service.

In any case, the maximum data storage time is estimated to be 10 years from the date of termination of the relationship.

Will we share your DATA WITH any other entities?

For the purposes stated above ("Because we need your data"), your Data may be communicated to third parties in order to meet obligations deriving from the law, regulations, community regulations or in relation to the management and performance of the contractual relationship.

For all the purposes indicated in this statement, your Data may also be communicated abroad, both inside and outside the European Union, in compliance with the rights and guarantees provided for by current legislation, subject to verification that the country concerned has in place an "adequate" level of protection.

The Data will also be processed by internal personnel of KONG spa who will be appropriately trained and who will operate as personnel authorized to process the Data.

Access to the archived Data may only be by public authorities, in the cases and methods provided for by the laws in force, in the event of litigation.

Your Personal data will not be subject to disclosure.


What are your rights?

At any time, you will have the right to request:

- access to your personal data;
- Its rectification if it is inaccurate;
- cancellation;
- Restriction of the processing of your data.

You will also have:

- the right to object to its processing;
- the right to its portability, i.e. to receive, in a structured format, in common use and readable by automatic device, the personal data you have provided.

We will deal with your request with the utmost diligence, in order to ensure that you are able to exercise your rights effectively. Finally, you will have the right to lodge a complaint with the National Supervisory Authority (Privacy Guarantor).

For full information on the rights of the data subject, please see Chapter III of the GDPR.


Can you revoke your consent once given?

Yes, you can revoke your consent at any time; however, you may not do so if it would:

- Impede the lawfulness of the processing based on the consent given before the revocation;
- Impede further processing of the same data on other legal grounds (for example, contractual obligations or legal obligations to which KONG spa is subject


The identification details of the Data Controller for the purpose of processing the data provided by you are as follows:

KONG spa in the person of its legal representative, Mr. Marco Bonaiti - with head office in Monte Marenzo (LC), via XXV Aprile, 4 tel. 0341.630506 E-mail: whom you may get in touch at any time, in order to exercise the rights provided by the GDPR and listed above in detail.


The Data Controller
KONG spa


Cookie policy

Use of cookies

The "Website" ( uses cookies to make sure that our services are simple and efficient for users who view the pages of Users viewing the site will enter the minimum amount of information in the devices being used, which are computers and mobile devices, in small text files called "cookies" saved in the directories used by the user's web browser. There are various types of cookies: some of them make use of the Site more effective, while others enable certain features.

On a detailed analysis, our cookies permit:

- the memorisation of preferences submitted;
- prevention of the same data being input multiple times during the user's visit, such as user name and password;
- analysis of use of the services and content provided by in order to optimize the browsing experience and the services offered.

Types of cookies

Technical cookies
This type of cookie allows the correct operation of certain sections of the Website. There are two categories: persistent cookies and session cookies:

- persistent cookies: once the browser is closed, they are not destroyed but remain up to a preset expiry date
- session cookies: these are destroyed each time the browser is closed

These cookies, which are always sent from our domain, are needed in order to view the site correctly and in relation to the technical services offered. Therefore, they will always be used and sent, unless the user does not change the settings in the user's browser (thus disrupting the display of pages of the site).

Analytical cookies

Cookies in this category are used to collect information on the use of the site. will use this information as part of an anonymous statistical analysis in order to improve the use of the Site and to make the content more interesting and relevant to the wishes of users. This type of cookie collects anonymous data on the activity of the user and how the user arrived on the site. Analytical cookies are sent either from the site itself or from third-party domains.

Analysis cookies for third-party services

These cookies are used in order to collect information on the use of the Site by users anonymously, such as: pages visited, time spent, origins of the traffic of origin, geographic origin, age, gender and interests for the purpose of marketing campaigns . These cookies are sent from third-party domains external to the Site.

Cookies to integrate products and functions of third-party software

This type of cookie integrates features developed by third parties within the pages of the site such as icons and preferences expressed in social networks, in order to share site content or for the use of third-party software services (such as software for generating maps and additional software that offer additional services). These cookies are sent from third-party domains and from partner sites that offer their functionality on the pages of the Site.

Profiling cookies

These cookies are needed to create user profiles, in order to send advertising messages in line with the preferences expressed by the user on the pages of the Site., in accordance with current legislation, is not required to seek consent for cookies and technical analytics, as necessary to provide the required services.
For all other types of cookies, consent may be expressed by the User by one or more of the following methods:

- Through specific configurations of the browser used or the related computer programmes used to navigate the pages that make up the site.
- By changing the settings in the use of third-party services

Both of these solutions may prevent the user from using or viewing parts of the Site.

Web sites and third-party services

The Site may contain links to other websites that have their own privacy policy, which may be different from that adopted by and is therefore not responsible for these sites.

List of cookies



Third-party cookies

Permanent cookie

Session cookies


Third-party cookies

Session cookies


Third-party cookies

Permanent cookie


Permanent cookie




Permanent cookie


Permanent cookie

Information about cookies


The _gat cookie is part of the Google Analytics analysis and monitoring service. This is a cookie that expires after 10 minutes after creation or update. It is used to block the number of requests for analysis scripts, so that the user's visits are considered unique.> cookie-usage  



The _ga cookie is part of the Google Analytics analysis and monitoring service. It is a cookie that expires two years after creation or update. It is used to distinguish users.> cookie-usage  


How to disable cookies by configuring the browser

If you would like to learn more about how your browser stores cookies during your browsing, please follow these links on the websites of the respective suppliers.

Mozilla Firefox

Google Chrome

Internet Explorer

Safari 6/7 Mavericks

Safari 8 Yosemite

Safari on iPhone, iPad, or iPod touch


I acceptI do not accept


The origin of Kong began a long time ago, in 1830 in a workshop at the foot of the Alps where Giuseppe Bonaiti gave rise to our story, writing important pages for Made in Italy.
The care to provide maximum protection for human lives, together with the dreams that men will “hang” while climbing peaks, led Bonaiti to export his products and philosophy throughout the world.
His carabiners have become a real fixture for everyone who practices vertical disciplines.
In 1977, the Bonaiti company changed its name to Kong, but its mission remains the same.

“To manufacture safety where risk is the protagonist”

The entire production cycle, from design to packaging, is made in our factory of 10,000 square meters, located in Monte Marenzo (LC), Italy, where each item of Personal Protective Equipment (PPE) is tested piece by piece and then sold throughout the world.
We can proudly say that, first of all, we are “manufacturers”.

  • our 80 employees perform their daily activities with passion to  produce high quality systems that ensure maximum safety.
  • our robots test 100% of our items at 70% of their breaking load.
  • our operators check 100% of the appearance and functionality of our products.

“KONG, from the past to the future, the evolution of safety”

Origins as Bonaitis

Traces of the Bonaiti family have been found in the baptism registers of Laorca from the 18th century, but the first purchase relative to the "Giambellino" fund dates back to 1827. The Bonaiti drawing mill, used for processing steel wire, was built in the Valley of Gerenzone at the outlet of the Valsassina road, known as the road of iron and lumber.

The first of the Bonaiti family’s factories dates back to 1830, when the first buildings were purchased for use as a drawing mill, along with a “twelfths” ownership of the large forge known as the “Gallina” in Laorca, and the one in San Giovanni alla Castagna, known as the “Piana”.

The central element of the local production structure was the large forge, where ingots and slabs for mallets were produced from cast iron, which through a process of beating, were reduced to round, square or flat rods. Then there was a series of workshops for secondary processing, specialised in the production of articles derived from iron wire, produced by the drawing mills: nails, buckles, chains, farm equipment and other articles of this kind.

The production processes of the Bonaiti drawing mill were the same as those used by the artisans of the Valley, who reduced the rods produced by the mallets, into iron wire. The wire rod was then used to produce several types of buckles and rings used in agriculture.

In the early twentieth century, the Bonaiti family, who had a strong cash flow, expanded their production department. The family became one of the leading steel groups in the Valley, controlling, with their direct and indirect holdings, 35-40% of the share capital of the Caleotto steel mill.

The Giuseppe Bonaiti company, using capital reserves accumulated during the years of the great war, and leveraging production synergies of the Caleotto group, introduced new types of products to offer to the market. By purchasing products from the Rolling Mill in Arlenico, the company began specialising in cold-rolled steel strips and steel strapping. 

Some of these processes were transferred to the new factory in Padua, where produced cotter pins, rivets and barbed wire were produced. The sales network was also expanded, opening in Naples, a branch with the function of a storage platform, for products destined to the markets of central and southern Italy.

In 1937 Giuseppe, Felice and Eros Bonaiti formed the company Giuseppe e Fratelli Bonaiti S.p.a., in Calolzio, about ten kilometres south of the Valley of Gerenzone.

In the fifties Giuseppe e Fratelli Bonaiti S.p.a. began producing steel carabiners
used for mountaineering. In collaboration with R. Cassin, the first D-shaped carabiner for mountaineering was created. It was built by the department that produced buckles, and was intended for a new sector, in which Giuseppe e Fratelli Bonaiti S.p.a. remained the only domestic producer until 1986.

The corporate restructuring of Giuseppe e Fratelli Bonaiti S.p.a. in the 1970s led to the development of three strategic business areas: strip and wire, locks, and carabiners, which ensured economies of scale, in the procurement phase and primary processing of the product.

The birth of mountaineering

Mountaineering became a sports discipline in the second half of the nineteenth century, when the most difficult summits were conquered; even those hitherto considered impossible. The first mountaineering manuals described the equipment that climbers should carry with them to face the climb safely. The use of carabiners to overcome the difficulties of ascents dates back to 1914, when O. Herzog, and his brother Willi, climbed the south face of Schüsselkarspitze, with the aid of pear-shaped hooks used by firemen in Munich.

In the domestic market the Bonaiti company was the only one to produce a specific carabiner for mountaineering. The technical and practical advice of R. Cassin was instrumental in improving the D-shaped carabiner for sale in Europe, and the name of the famous mountaineer made the Bonaiti name well-known to foreign importers of mountain equipment. National distribution was ensured by the same representatives that dealt with buckle products, who sold the product to hardware stores.

In the 1960s the first light alloy carabiners for extreme mountaineering were manufactured, and this new material reduced the product’s weight from 200 to 65 grams. These carabiners were highly appreciated by rock climbers due to aesthetic matters, since the different colours, obtained through an anodising process, linked to the rest of their equipment.


The birth of Kong

The growing demand for carabiners, together with the issues of interior space, drove the management to decentralise certain processing stages.

In the 1970s, the department that produced carabiners, which was confined in a small space, needed a larger area for the cohesiveness of operations, and for its development. The warehouses of Giuseppe e Fratelli Bonaiti could not be extended due to the administrative constraints imposed by the Regulatory Plan of Calolzio. In 1977 the company purchased a plot covering 30000 m2 in Monte Marenzo, so that they could build a new production site, to which they would transfer the manufacture of carabiners. 

1977, right here in Monte Marenzo, saw the launch of Kong S.p.a., the only production plant where still today over 3000 products are distributed and sold all over the world.
In order to create a corporate image that was recognisable in the countries to which it exported its goods, in 1982 the company registered the name and trademark Kong in various countries: the current and well-known oval that recalls the outline of a carabiner.

Market expansion strategies

At this point the development strategies of Kong involved a change of image in the eyes of the consumer, not only offering connectors, but above all safety.

The range of products grew considerably, and now included pulleys, descenders and ascenders for ropes, helmets, harnesses, but mostly they began to produce specific articles for mountain rescue such as stretchers, fishing poles and various other specific tools needed for mountaineering use, adapted to the needs of those living the mountains not only for leisure but for professional reasons.

In the early 1980s, Kong was the only Italian company that manufactured carabiners for mountaineering, while in the worldwide market there were five manufacturers: Simond and La Prade (French), Faders (Spanish), Stubai (Austrian) and Chouinard (American).

On the world market there were about eighteen different brands of connectors for rock-climbing, but ten of these were produced by Kong.

In 1986 the company Aludesign was founded and began producing climbing carabiners. The competition from a new manufacturer led the company to introduce highly sophisticated carabiners.
The product’s convenient and economical image was abandoned, in favour of a high-tech article.

In 1987 Kong filed the patent for a new carabiner fastening system, to eliminate any point that could entangle the rope. This particular system, called "Key Lock", drew its name from the shape of the joint between the lever and the body of the connector, which resembled a keyhole. Its purpose was to eliminate from the body and from the finger any bumps that might wear down the rope or impede its insertion and removal. This fastening, in comparison with other carabiners, offered the advantage of sufficient security, even if the lever were about 2mm.

A few years later, with the same spirit of innovation, FROG was born; a revolutionary unidirectional connector with an automatic clamp, for specific anchor points.
Designed in collaboration with the Politecnico di Milano, FROG is an absolutely new connector in terms of both form and operating mechanism: FROG completely changes the concept of a "carabiner" in its capacity as a hook.
Insertion is extraordinarily fast and safe, even in anchor points that are not easily reached with classic connectors.
The FROG has been patented and to this day is known the world over as a symbolic product manufactured by Kong.

Meanwhile Kong began to also make its name in the nautical sector, thanks to the supply of metal accessories, shackles, rings and carabiners, required for finishing off the equipment of a vessel.

The most famous and valued products were the famous revolving or fixed joints, in carbon steel or stainless steel, that are used to connect the chain to the anchor; the range of these articles was implemented with new measures and versions and is still available in the company's catalogues.

In the late 1980s a special shackle was patented, the chain gripper, which was used to join together the chains that were used on boats, having a size ranging between 5 and 12 mm. Also complementary articles to those already in production were produced: a support for powerful outboard motors, which was an accessory already known in the U.S. market, while in Europe there were no manufacturers of this component; and a special carabiner for towing water skis equipped with quick release mechanism.

Marine production technologies specialising in anticorrosion treatments were thenthen also applied to the rings and carabiners sold to the chemical and food industry, where the product must have a high surface resistance.

Kong became practically the only western manufacturer of stainless steel carabiners for industrial use. The customer was willing to pay a surplus of price, to have a product guaranteed and certified according to CE regulations, through destructive tests aimed at assessing the limit of breakage, resistance and corrosion. In those years the manufacturers of China and Taiwan were specialized in the production of non-certified carabiners, intended for uses that did not require particular technical requirements.

Meanwhile, the production of carabiners and personal protective equipment was flanked by more complex articles intended for mountain and sea rescue operations.
With the collaboration of the emergency corps, the fishing pole “Stelvio” was created,along with the "Cevedale" tripod and innovative stretcher, "Lecco", which thanks to the unique feature of being able to be disassembled and easily transported over the shoulders, became the standard for all emergency situations where a helicopter could not reach due to bad weather conditions.

Thanks to this intuition, within a short time Kong became a reference point for the development and production of articles devoted to emergency and rescue operations, opening up the road in an area that was still fertile, and very satisfying both in economic and moral terms.

Alongside these new areas, towards the end of the ‘80s a new sports discipline was identified, to diversify production.

The decision to produce golfing items, which were not in competition with those produced by Kong, retraced one of the Bonaiti family’s expansion strategies: differentiating production into an independent sector, which could then be detached from the company.

In 1989 Kong began producing all the necessary equipment for golf with a new brand named MC Creation Made in the Principality of Monaco, or more simply Monte Carlo. Some articles, such as golf clubs and bags, were assembled as made-to-measure items for customers who made specific requests for certain technical and aesthetic needs.

To publicise the new product range, sponsorship contracts were entered into, with professional players, including the well-known player Costantino Rocca.
This venture continued until the first years of 2000, when the company decided to abandon it permanently to devote itself to new areas.


Boom years

At this point, thanks to a range of innovative and unique products, a very aggressive sales and marketing policy was implemented.

The company participated in a series of exhibitions throughout the world, related to different sectors, from mountaineering to rescue, sailing to industry.

Between 1982 to 1990 advertising costs went up by 400% and served to consolidate the company's image worldwide.

Interesting facts

In 1978 the gravel that was used during the construction of the new factory to settle marshland, was massed downstream of the factory to create a dynamic push that would balance the structure of the buildings.

In 1986, this 300-metre long embankment was paved, and legalised as a non-sloping airfield, recognised by the A.N.P.S. (Associazione Nazionale della Polizia di Stato - National Police Association), as a section of Malpensa airport.

Today this runway is also used by the Civil Defence and Mountain Rescue helicopters for exercises in lowering and recovery using stretchers.

Currently, in addition to the Volo Club Lecco Kong, with about fifty members and around twenty aircraft, there is a very active ULM flying school which trains a few dozen new ultralight pilots every year.

Since 2017 it has also been home to the first Italian school of ENAC certified drones.

Commercial decentralisation in strategic countries

From the early ‘90s Kong began to set up companies with commercial and non-productive objectives in emerging countries. This was in order to have control and a direct presence in countries that were beginning to offer some very interesting developments and opportunities.

Kong Deutschland (1992), Kong Russia (2007), Kong USA (2009), Kong America Do Sul (2013) and the latest Kong Far East (2017) are realities that within a few years led Kong to have a global approach, with the dynamics of a "multinational".

There still remains only one production site, that of Monte Marenzo in Italy, which in a covered area of 10,000 m² employs about 80 people, including labourers, planners, designers, administrative staff and salespeople.

The role carried out by the planners and designers is particularly important; they carefully analyse, interpret and anticipate market needs.


Future strategies

Today Kong’s core business is safety and rescue. Mountaineering techniques have been been adopted in construction, where, in order to observe accident prevention regulations, workers use suitably-modified equipment, originating from the world of mountaineering. The range of products has been adapted to the standards required for work at height.

In the 2000s an area of the factory area was equipped to provide professional training; no longer just a product, but also pre and post sales support and training.

In 2014 Kong s.p.a. became enrolled in the regional register for accredited subjects due to its professional training and education services.

In 2016 it was accredited as an IRATA training company (Industrial Rope Access Trade Association), member n°5058/T.

Today there are several tens of thousands of hours of training provided regarding personnel from the armed forces, emergency first aid (FIRE BRIGADE, civil protection, etc.) and ordinary and extraordinary medical assistance (118, Red Cross and miscellaneous assistance works) as well as operators of acrobatic parks, freelancers and employees of private enterprises.


Case History, some innovations that became benchmarks

The ability and willingness to innovate, to find original solutions to common problems, is synonymous with the good health of a company. At Kong this has always been a cornerstone for approaching the market, and over the years there have been many examples:

  • the first asymmetric "D" shape carabiner
  • the use of cold-forged aluminium
  • the two-pins latch
  • colour, plastic coated or anodised
  • the first pre-assembled via ferrata kit
  • the Gi-Gi plate
  • the simple but ingenious KEY-LOCK System
  • the CLAMP SYSTEM of the FROG connector
  • the first carbon fibre spinal board X-TRIM
  • the first ascender handle, FUTURA, that works in line with the rope
  • the first floating stretcher designed for river Rescues, 911 CANYON
  • the first electronic stabiliser for helicopter rescue stretchers KARS

In 2016 in the company created a small museum and an exhibition hall with the aim of collecting these memories and keeping them alive as a stimulus and a source of pride for employees in front of customers and visitors.

The link with the territory and entrepreneurial choices

The economic crisis of 2009 crippled many national entrepreneurial companies, and also the rich territory of Lecco suffered greatly. Kong coped with the harsh blow with a number of notable business choices, especially the choice to internalise some processes previously contracted to external companies.

A new textile department, new machinery, training centre, and new sales offices gave work to internal staff, avoiding retrenchment of employees.

Today, after almost ten years, we can look back on a situation of steady growth, both in terms of turnover and the number of new recruits.
A mountaineering approach has always been part of the company’s philosophy, even in terms of business development; a slow but steady climb, which for nearly two hundred years has led Kong to the summit.

As Marco Bonaiti wrote in an old catalogue:

“The higher you go, the wider you see; the wider you see, the longer you dream”

Download the book "Kong, 200 years at the top"